1. Develop good habits. Don't mess around with unextinguished cigarette butts and fires at will. Don't smoke on the bed or sofa after drinking, fatigue and before going to bed.
2. In summer, mosquito coils should be placed on a dedicated stand, not close to flammable objects such as curtains and mosquito nets.
3. Do not store gasoline, alcohol and other flammable and explosive materials randomly, and strengthen safety protection when using it.
4. Be especially careful when using open flames. Do not place combustible or combustible materials near the fire source.
5. Welding and cutting operations have a high fire hazard. Be aware of nearby flammable and combustible materials before the operation. Remove nearby flammable and combustible materials before the operation. Special personnel must be supervised during the operation to prevent high-temperature welding debris from splashing and causing fires. Check whether they are left after the operation. Tinder.
6. If a gas leak is found, quickly close the valve, open the doors and windows, do not touch the electrical switch box and use an open flame, and promptly notify the professional maintenance department to deal with it.
7. The electrical wiring should be checked frequently to prevent aging, short circuit, leakage, etc. The worn-out electrical wiring should be repaired and replaced in time.
8. The circuit fuse (sheet) is blown. Do not use copper wire or iron wire instead. It is recommended to install an automatic air switch.
9. Don't overload the electricity, and don't pull the wires randomly.
10. Before leaving the residence or going to bed, check whether the electrical appliances are powered off, whether the main power supply is cut off, whether the gas valve is closed, and whether the open flame is extinguished.
11. Do not pile up debris in corridors, stairways, fire exits, etc., and ensure that the passages and safety exits are unblocked.
